1:1 Mix Ratio Silicone Potting Compound HN-8806A/B | High Thermal Conductivity & Flame Retardant
Product Overview for silicone potting compound:
Provides a dual guarantee of heat dissipation and safety. HN-8806 is a 1:1 mix ratio, two-component silicone potting compound. It is easy to use, effectively transfers heat from electronic components (≥0.76 W/m·K), and is UL 94V-0 certified, making it an ideal choice for power modules, chargers, and more.
Key Features for silicone potting compound:
1:1 Mix Ratio | Excellent Thermal Conductivity (≥0.76 W/m·K) | UL 94V-0 Flame Retardant | Wide Temperature Resistance (-50°C ~ +250°C) | High Insulation.
Technical Parameters for silicone potting compound:
Appearance (A/B): White Liquid / Grey Liquid
Mixed Viscosity: 2000-3000 mPa·S
Mixing Ratio: 1:1 (by weight or volume)
Pot Life (@25°C): 0.3-0.4 hours
Initial Cure (@25°C): 2-3 hours
Full Cure (@25°C): 4-12 hours or (@80°C): 0.2 hours
Hardness (Shore A): 45±5
Thermal Conductivity: ≥0.76 W/m·K
Volume Resistivity: 1.0×10¹⁶ Ω·cm
Dielectric Strength: 18-25 kV/mm
Flame Retardancy Rating: UL 94V-0
Operating Temperature Range: -50°C ~ +250°C
Product Applications for silicone potting compound:
Power Modules:IGBT modules, PIM modules, AC-DC/DC-DC power supplies.
Fast-Charging Devices:Quick chargers, vehicle chargers, charging adapters.
Automotive Electronics:Motor Control Units (MCU), Battery Management System (BMS) auxiliary circuits.
Industrial Control:Servo drives, inverter power sections.
Usage Instructions for silicone potting compound:
1. Preparation:Clean surfaces to be potted, ensuring they are free of grease and dust.
2. Mixing:Precisely weigh components A and B in a 1:1 ratio by weight. Mix thoroughly in one direction until uniform in color.
3. Deaeration (Optional):For best results, vacuum degas the mixed compound (-0.095MPa, 5-10 minutes).
4. Potting:Slowly pour the compound into the assembly, allowing it to flow and fill naturally.
5. Curing:Allow to cure at room temperature, or heat at 80°C to accelerate the process.
Important Notes for silicone potting compound:
Always stir components A and B separately in their original containers before use.
Stir in one direction to avoid mixing in excessive air bubbles.
Strictly avoid contact with condensation-cure silicone rubbers, epoxy resins, or polyurethanes to prevent inhibition of cure ("poisoning").
Reseal containers immediately after use and store in a cool, dry place.
Packaging & Storage for silicone potting compound:
Standard Packaging: Component A 25kg/drum, Component B 25kg/drum.
Store in a cool, dry place. Shelf life: 6 months.
FAQ for silicone potting compound:
Q: What is the benefit of the 1:1 mix ratio?
A: It simplifies weighing, reduces errors, and improves production efficiency, especially for manual and fast-paced production.
Q: Is a thermal conductivity of 0.76 W/m·K sufficient?
A: Yes, it is suitable for thermal management in most power electronics, effectively reducing operating temperatures and improving reliability.
Q: What does the 94V-0 certification mean?
A: It means a 3mm test specimen self-extinguishes within 30 seconds after flame removal without dripping, providing a crucial safety guarantee.
Q: Is the pot life sufficient?
A: 0.3-0.4 hours is suitable for most small to medium-sized assemblies. For very large parts, segment potting or consulting us is recommended.
Q: Is specialized equipment needed?
A: Manual mixing is feasible, but for high-volume production, we highly recommend using a two-component metering and mixing system for guaranteed quality.
Product Tags:
|
|
1:1 Mix Ratio Silicone Potting Compound HN-8806A/B | High Thermal Conductivity & Flame Retardant Images
|
